..
DEWE-211
Handheld data acquisition instrument for USB
Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879-3144
Tel: +1 401-284-3750
Fax: +1 401-284-3755
The DEWE-211 can be equipped with any of our 16-channel ORION cards, which have sample rates up to 500 kS/s/ch (simultaneous) @ 16-bit, or up to 200 kS/s/ch @ 24-bit.
The DEWE-211 is equally at home testing cars and motorcycles, due to its small form factor, solid state hard drive, DEWESoft acquisition software, CAN BUS and 1/100/200 Hz GPS interface options, and EPAD2 expansion capabilities.
The DEWE-211 is equally at home testing cars and motorcycles, due to its small form factor, solid state hard drive, DEWESoft acquisition software, CAN BUS and 1/100/200 Hz GPS interface options, and EPAD2 expansion capabilities.
- DC powered - ideal for vehicle applications
- Small, lightweight, easy to mount
- Perfect for in-flight and in-vehicle usage
- Accepts 16 channels of MDAQ conditioners and any ORION card
- Optional CAN BUS and BATTERY power
Top Applications
- Vehicle test (chassis dynamics, CAPS, RAH, PBN…)
- Aerospace test (in flight system)
- Noise and vibe test (with MDAQ-ACC amps)
211 mounted in an aircraft
Multi sensor compatibility
211 mounted on a motorcycle
Small mobile displays
GPS up to 100 Hz
Dynamic applications require the fast rate of our 100 Hz GPS. Slower GPS sensors also available.
CAN BUS interface option
Two CAN bus interfaces can be built in. Isolation is available for them as well.
200 kS/s sample rate
Choose the ORION-1624-20x card when you want 200 kS/s/ch @ 24-bit resolution.
Tach / encoder inputs
There are two 32-bit counter inputs, which support simple tachs, quadrature encoders, and frequency/period/duty cycle measurements.
Amazing software
And not just any software - DS-7, the best data acquisition software in the world.
Mobile display
Portable, ruggedized display with touchscreen makes using the DEWE-211 easier than ever in the vehicle.
There is really only one model of the DEWE-211 -- but you can order it with or without the add-on battery pack. This thin option is bolted to the underside of the DEWE-211 and provides a great UPS against accidental power loss - and allows you to run the system for approximately 2 hours without any power at all.
DEWE-211 with battery pack add-on
Upgraded model:
Same as the standard model except with the add-on battery pack.
Same as the standard model except with the add-on battery pack.
DEWE-211
Standard model:
Choose the ORION A/D card and your choice of MDAQ signal conditioners, and DS-7 software. Popular options include CAN and ARINC / 1553 interfaces.
Choose the ORION A/D card and your choice of MDAQ signal conditioners, and DS-7 software. Popular options include CAN and ARINC / 1553 interfaces.
Computer specs:
2 GHz Intel® Core2Duo processor, 2 GB RAM
32 GB flash disk, max. data throughput 40 MB/s
4 x USB, 2 x LAN Ethernet, WLAN interface with external antenna, 1 x Firewire
Power Specs:
Power supply 8 to 30 VDC, incl. external AC adaptor
Includes AC/DC adapter for lab use
Optional battery pack available
Counter and digital inputs:
According to the ORION card installed.
CAN interface (optional)
2 x CAN bus interfaces
Protocol: CAN 2.0B, up to 1 Mb/s
Physical layer: high speed
2 GHz Intel® Core2Duo processor, 2 GB RAM
32 GB flash disk, max. data throughput 40 MB/s
4 x USB, 2 x LAN Ethernet, WLAN interface with external antenna, 1 x Firewire
Power Specs:
Power supply 8 to 30 VDC, incl. external AC adaptor
Includes AC/DC adapter for lab use
Optional battery pack available
Counter and digital inputs:
According to the ORION card installed.
CAN interface (optional)
2 x CAN bus interfaces
Protocol: CAN 2.0B, up to 1 Mb/s
Physical layer: high speed
Accessories included:
Soft carrying pouch
AC/DC adapter and cables
Printed manual
Mechanical Specs
317 x 252 x 92 mm (12.5 x 9.9 x 3.6 in.)
Typ. 5 kg (11 lbs.)
Environmental Specs
Temp: 0 ~ +50 °C
Humidity: 95% non cond., @ 60°C
Soft carrying pouch
AC/DC adapter and cables
Printed manual
Mechanical Specs
317 x 252 x 92 mm (12.5 x 9.9 x 3.6 in.)
Typ. 5 kg (11 lbs.)
Environmental Specs
Temp: 0 ~ +50 °C
Humidity: 95% non cond., @ 60°C
A/D performance
According to the ORION card installed.
Analog input specs
According to the MDAQ conditioners installed.
Software specs
DS-7-PROF included with the DEWE-43-A
See DS-7 specifications for complete details.
According to the ORION card installed.
Analog input specs
According to the MDAQ conditioners installed.
Software specs
DS-7-PROF included with the DEWE-43-A
See DS-7 specifications for complete details.
ORION series A/D cards
Simultaneous sampling Dewetron ORION cards are at the heart of every Dewetron data acquisition system, providing the TIMING BACKBONE that allows us to record so many disparate data sources in perfect sync with each other. Each ORION card provides not only analog inputs, but digital inputs and digital I/O lines, and synchronous counter/encoders. In addition, they can be upgraded to have more digital/encoder lines, as well as two synchronous CAN BUS interfaces.
Key Features
Key Features
- Simultaneous sampling
- Separate ADC on each channel
- 16, 22, and 24 bit resolution
- Sigma delta or successive approximation ADC chips
- Synchronous counter/encoder inputs and digital I/O lines
- Optional CAN BUS interfaces
- Optional counter expansion and SUPER counter expansion in most cards
16-bit ORION cards
ORION 16-bit cards are available in several channel counts and maximum sample rates, up to 1 MS/s/ch.
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
24-bit ORION cards
ORION 24-bit cards are ideal for dynamic signal applications, and sample rates up to 200 kS/s/ch with automatic anti-aliasing filtering.
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
22-bit ORION cards
A little less expensive than 24-bit, but still high performance, 22-bit cards are available up to 32 channels and 100 kS/s/ch with automatic anti-aliasing filtering.
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
Brochures
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
Manuals
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
MDAQ Series DIFFERENTIAL Signal Conditioners
DIFFERENTIAL, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from IEPE, universal, strain, voltage (±200V)...
Key Features
Key Features
- 8 channel SUB blocks can be mixed and matched
- Bandwidth up to 300 kHz
- ±5 V conditioned signal output
- Factory installed only
Our most popular MDAQ modules:
Voltage
MDAQ-SUB-V-200-BNC and -D
MDAQ-SUB-V-200-BNC and -D
DIFFERENTIAL voltage input card
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
IEPE / low voltage
MDAQ-SUB-ACC and -ACC-A
MDAQ-SUB-ACC and -ACC-A
DIFFERENTIAL IEPE / low voltage input card
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Bridge / low voltage
MDAQ-SUB-BRIDGE
MDAQ-SUB-BRIDGE
DIFFERENTIAL bridge / low-voltage input card
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Strain / universal
MDAQ-SUB-STG
MDAQ-SUB-STG
DIFFERENTIAL universal input card
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Popular MDAQ filter add-on options
2 pole filter, Butterworth
MDAQ-FILT-5-BU
MDAQ-FILT-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
2 pole filter, Butterworth
MDAQ-FILT-5-BU-S1
MDAQ-FILT-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
2 pole filter, Bessel
MDAQ-FILT-5-BE
MDAQ-FILT-5-BE
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU
MDAQ-FILT-AAF4-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S1
MDAQ-FILT-AAF4-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
4 pole, Bessel
MDAQ-FILT-AAF4-5-BEU-S1
MDAQ-FILT-AAF4-5-BEU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S2
MDAQ-FILT-AAF4-5-BU-S2
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Popular MDAQ filter add-on options
MSI series "smart adapters"
MSI-BR-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-BR-V200
200 Volt input smart adapter
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
MSI-BR-TH (J, K, T, C)
Thermocouple smart adapter
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
MSI-BR-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-BR-CHA-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
ADAPTERS for other input types
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
ADAP-CONN-DSUB-9
Mating 9-pin DSUB connector with screw terminals inside, for easy hook-up without any soldering or de-soldering.
ADAP-MDAQ-BNCF
9-pin DSUB to BNC connector adapter, with impedance matching resistor inside.
ADAP-SHUNT-20MA
Shunt adapter, 50 Ω, 0.1%, 1 W. For 0-20 mA signals. BNC input connector
DEWE-211 Resources
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
PDF file, 1 MB
PDF file, 2 MB