..
DEWE-2600
Amazing benchtop data acquisition system
Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879-3144
Tel: +1 401-284-3750
Fax: +1 401-284-3755
The DEWE-2600 is one of the most flexible data acquisition and computing platform that we ever made. Built into a rugged "lunch box" all-metal form factor, the DEWE-2600 features a modular rear panel that can be configured in a staggering variety of ways. You can have 16 DAQ modules, or up to 80 MDAQ channels, or a combination of 16 DAQ and 32 MDAQ channels. Function panels are available for adding additional counters, digital inputs, sensor power connectors, and more.
Another side of the DEWE-2600's flexibility is the sheer number of instruments that we built from it, including:
Another side of the DEWE-2600's flexibility is the sheer number of instruments that we built from it, including:
- Combustion analyzer
- Transient recorder
- e-mobility power tester
- PCM encoder/decoder
The 2600 series is available in three models, based on which kinds of signal conditioning you would like to have on the rear panel: DAQ/HSI when high bandwidth AND isolation are needed, MDAQ when med/high bandwidth DIFFERENTIAL inputs are needed -- and even a combination of the two!
The 2600 series also accepts a wide range of additional interfaces, including ARINC, 1553, PCM, FlexRay, CAN BUS, and more. It is one of the most versatile and popular instruments that we have ever made, because it can be configured to do handle about anything!
The 2600 series also accepts a wide range of additional interfaces, including ARINC, 1553, PCM, FlexRay, CAN BUS, and more. It is one of the most versatile and popular instruments that we have ever made, because it can be configured to do handle about anything!
Top Applications
- Vehicle test (chassis, HVAC, energy test)
- Aerospace test (with PCM or ARINC/1553 cards also installed)
- Energy test (with DAQ and HSI ISOLATED conditioners)
- Noise and vibe test (with MDAQ-ACC conditioners)
Removable FAST hard disk drive
Flexible rear panel configurations
Hot-swappable batteries
A 1 TB removable HDD is standard feature. You can also opt for solid state HDD(s) to be installed.
So many combinations of our DAQ, HSI, PAD, MPAD, and MDAQ series signal conditioners are possible, that we cannot even list them all.
Battery power is one of the most popular options for the 2600 series. Run your system for hours without connecting it to power!
DEWE-2600
- 16 slots for DAQ / HSI modules
- Portable, AC or battery powered
- 15" wide aspect display
- Choose any A/D card
- Choose DS-7 software version
- Add your choice of modules
DEWE-2602
- 16 slots for DAQ / HSI modules AND 2 x 2U positions for up to 32 MDAQ channels
- Portable, AC or battery powered
- 15" wide aspect display
- Choose any A/D card
- Choose DS-7 software version
- Add your choice of MDAQ / panels
- Add your choice of DAQ/HSI modules
DEWE-2601
- 4 x 2U MDAQ positions for up to 64 channels (or 80 with BNC)
- Portable, AC or battery powered
- 15" wide aspect display
- Choose any A/D card
- Choose DS-7 software version
- Add your choice of MDAQ / panels
Computer specs:
Core2Duo 2 GHz Intel processor, 2 GB RAM
Windows 7 Professional OS (32-bit)
Removable HDD with 300 GB drive for data and the operating system
Additional drives, internal drives, or solid state drives, optionally available
2 x ethernet, 4 x USB 2.0, IEEE-1394 on board, A/V I/O, VGA output
15" XGA 1024x768 px
Touchscreen optional in this model
DVD+-CD-RW drive
Power Specs
120/240 VAC power 50/60 Hz
Optional: 2600-PS-BAT SideHAND hot-swappable battery system with 3 slots for BATT-95WH smart batteries
2 BATT-95WH batteries included
18-24VDC max input
Battery option includes AC/DC adapter and AC power cord
Core2Duo 2 GHz Intel processor, 2 GB RAM
Windows 7 Professional OS (32-bit)
Removable HDD with 300 GB drive for data and the operating system
Additional drives, internal drives, or solid state drives, optionally available
2 x ethernet, 4 x USB 2.0, IEEE-1394 on board, A/V I/O, VGA output
15" XGA 1024x768 px
Touchscreen optional in this model
DVD+-CD-RW drive
Power Specs
120/240 VAC power 50/60 Hz
Optional: 2600-PS-BAT SideHAND hot-swappable battery system with 3 slots for BATT-95WH smart batteries
2 BATT-95WH batteries included
18-24VDC max input
Battery option includes AC/DC adapter and AC power cord
Mechanical Specs
Size: 409 x 245 x 291 mm (16.1 x 9.6 x 11.5 in.)
Weight: 14.5 kg (32 lbs) without batteries
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
Size: 409 x 245 x 291 mm (16.1 x 9.6 x 11.5 in.)
Weight: 14.5 kg (32 lbs) without batteries
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
Analog input specs
According to the selected A/D card(s). See those specifications for complete details.
Signal Conditioning specs:
According to the selected signal conditioner(s). See those specifications for complete details.
Software specs
According to the software installed. See those specifications for complete details.
Accessories included:
Soft carrying bag with pouches and straps
Power cord
Printed and PDF manuals
According to the selected A/D card(s). See those specifications for complete details.
Signal Conditioning specs:
According to the selected signal conditioner(s). See those specifications for complete details.
Software specs
According to the software installed. See those specifications for complete details.
Accessories included:
Soft carrying bag with pouches and straps
Power cord
Printed and PDF manuals
ORION series A/D cards
Simultaneous sampling Dewetron ORION cards are at the heart of every Dewetron data acquisition system, providing the TIMING BACKBONE that allows us to record so many disparate data sources in perfect sync with each other. Each ORION card provides not only analog inputs, but digital inputs and digital I/O lines, and synchronous counter/encoders. In addition, they can be upgraded to have more digital/encoder lines, as well as two synchronous CAN BUS interfaces.
Key Features
Key Features
- Simultaneous sampling
- Separate ADC on each channel
- 16, 22, and 24 bit resolution
- Sigma delta or successive approximation ADC chips
- Synchronous counter/encoder inputs and digital I/O lines
- Optional CAN BUS interfaces
- Optional counter expansion and SUPER counter expansion in most cards
16-bit ORION cards
ORION 16-bit cards are available in several channel counts and maximum sample rates, up to 1 MS/s/ch.
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
24-bit ORION cards
ORION 24-bit cards are ideal for dynamic signal applications, and sample rates up to 200 kS/s/ch with automatic anti-aliasing filtering.
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
22-bit ORION cards
A little less expensive than 24-bit, but still high performance, 22-bit cards are available up to 32 channels and 100 kS/s/ch with automatic anti-aliasing filtering.
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
Brochures
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
Manuals
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
DAQ series ISOLATED plugin modules
ISOLATED, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from universal, strain, high voltage (±1400V), low voltage (±10 mV), temperature, F/V, IEPE...
Key Features
- High isolation up to 1.8 kVRMS
- High bandwidth up to 700 kHz
- ±5 V conditioned signal output
- Easy to exchange, hot-swappable
High voltage
DAQP-HV and HV-S3
DAQP-HV and HV-S3
Low voltage
DAQP-LV
DAQP-LV
Strain / universal (300 kHz bandwidth)
DAQP-STG
DAQP-STG
Current
DAQP-LA and -LA-B-S1
DAQP-LA and -LA-B-S1
Isolated high voltage input module
300 kHz bandwidth (optionally 700 kHz)
±20 to ±1400V ranges
1.8 kVRMS line to line isolation
1.4 kVRMS line to ground isolation
Optional screw terminal connectors for permanent installation
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth (optionally 700 kHz)
±20 to ±1400V ranges
1.8 kVRMS line to line isolation
1.4 kVRMS line to ground isolation
Optional screw terminal connectors for permanent installation
Hot-swappable plug-in module with conditioned ±5 V output
Isolated low voltage input module
300 kHz bandwidth
±10mV to ±50V ranges
AC/DC coupling
Isolation: 1 kV (banana) or 350 VDC
4-20 mA and ±5A via external shunts
Banana, BNC, LEMO, DSUB, or screw
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth
±10mV to ±50V ranges
AC/DC coupling
Isolation: 1 kV (banana) or 350 VDC
4-20 mA and ±5A via external shunts
Banana, BNC, LEMO, DSUB, or screw
Hot-swappable plug-in module with conditioned ±5 V output
Isolated universal input module
300 kHz bandwidth
350 V isolation
Handles Strain gage and bridge sensors (constant voltage excitation), Piezoresistive bridge sensors (constant current excitation), Voltage up to ±10 V, RTDs (Pt100 to Pt2000), Resistance
Additional sensors via MSI
300 kHz bandwidth
350 V isolation
Handles Strain gage and bridge sensors (constant voltage excitation), Piezoresistive bridge sensors (constant current excitation), Voltage up to ±10 V, RTDs (Pt100 to Pt2000), Resistance
Additional sensors via MSI
Isolated low current input module
300 kHz bandwidth
1.4 kVRMS Input to ground
0.1 A, 0.3 A, 1 A, 3 A, 10 A peak, 30 A peak, DAQP-LA-B-S1: 2 mA, 6 mA, 20 mA, 60 mA, 200 mA, 0.6 A
Screw terminals or banana jacks
300 kHz bandwidth
1.4 kVRMS Input to ground
0.1 A, 0.3 A, 1 A, 3 A, 10 A peak, 30 A peak, DAQP-LA-B-S1: 2 mA, 6 mA, 20 mA, 60 mA, 200 mA, 0.6 A
Screw terminals or banana jacks
IEPE accelerometers
DAQP-ACC-A
DAQP-ACC-A
IEPE module with sensor supply
300 kHz bandwidth
±50 mV to ±5 V input
4 mA or 8 mA excitation current
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth
±50 mV to ±5 V input
4 mA or 8 mA excitation current
Hot-swappable plug-in module with conditioned ±5 V output
Frequency to voltage
DAQP-FREQ-A
DAQP-FREQ-A
Frequency to voltage module
Additional conditioned TTL output
Ranges up to 200 kHz
Input and output filters
Auto trigger level detection (or manual)
Isolation: ±350 V
Hot-swappable plug-in module with conditioned ±5 V output
Additional conditioned TTL output
Ranges up to 200 kHz
Input and output filters
Auto trigger level detection (or manual)
Isolation: ±350 V
Hot-swappable plug-in module with conditioned ±5 V output
Universal (3 kHz b/w)
DAQP-MULTI
DAQP-MULTI
Isolated universal input module
3 kHz bandwidth
1000 V isolation
Any thermocouple, internal linearization Also RTD (Pt100, Pt200, Pt500, Pt1000 and Pt2000 sensors), resistance from 1Ω to 1 MΩ, Bridge input: constant current powered 4-wire full bridge sensors, 13 ranges from ±0.5 to 5000 mV/mA, Voltage 10 ranges from ±5 mV to ± 5 V
Hot-swappable plug-in module with conditioned ±5 V output
3 kHz bandwidth
1000 V isolation
Any thermocouple, internal linearization Also RTD (Pt100, Pt200, Pt500, Pt1000 and Pt2000 sensors), resistance from 1Ω to 1 MΩ, Bridge input: constant current powered 4-wire full bridge sensors, 13 ranges from ±0.5 to 5000 mV/mA, Voltage 10 ranges from ±5 mV to ± 5 V
Hot-swappable plug-in module with conditioned ±5 V output
Thermocouple (3 kHz b/w)
DAQP-THERM
DAQP-THERM
Any thermocouple (K, J, T, R, S, N, E, B, L, C, U)
Freely programmable range
Internal linearization, ±5 V linear output
High-speed, 3 kHz bandwidth
High Isolation, ±1000 Vrms continuous
Universal thermocouple MINI input connector
Hot-swappable plug-in modules with conditioned linear ±5V output
Freely programmable range
Internal linearization, ±5 V linear output
High-speed, 3 kHz bandwidth
High Isolation, ±1000 Vrms continuous
Universal thermocouple MINI input connector
Hot-swappable plug-in modules with conditioned linear ±5V output
MDAQ Series DIFFERENTIAL Signal Conditioners
DIFFERENTIAL, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from IEPE, universal, strain, voltage (±200V)...
Key Features
Key Features
- 8 channel SUB blocks can be mixed and matched
- Bandwidth up to 300 kHz
- ±5 V conditioned signal output
- Factory installed only
Our most popular MDAQ modules:
Voltage
MDAQ-SUB-V-200-BNC and -D
MDAQ-SUB-V-200-BNC and -D
DIFFERENTIAL voltage input card
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
IEPE / low voltage
MDAQ-SUB-ACC and -ACC-A
MDAQ-SUB-ACC and -ACC-A
DIFFERENTIAL IEPE / low voltage input card
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Bridge / low voltage
MDAQ-SUB-BRIDGE
MDAQ-SUB-BRIDGE
DIFFERENTIAL bridge / low-voltage input card
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Strain / universal
MDAQ-SUB-STG
MDAQ-SUB-STG
DIFFERENTIAL universal input card
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Popular MDAQ filter add-on options
2 pole filter, Butterworth
MDAQ-FILT-5-BU
MDAQ-FILT-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
2 pole filter, Butterworth
MDAQ-FILT-5-BU-S1
MDAQ-FILT-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
2 pole filter, Bessel
MDAQ-FILT-5-BE
MDAQ-FILT-5-BE
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU
MDAQ-FILT-AAF4-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S1
MDAQ-FILT-AAF4-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
4 pole, Bessel
MDAQ-FILT-AAF4-5-BEU-S1
MDAQ-FILT-AAF4-5-BEU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S2
MDAQ-FILT-AAF4-5-BU-S2
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Popular MDAQ filter add-on options
BATT-95WH
Additional lithium-ion smart battery
MSI "Multiple Sensor interfaces"
These are "smart" interfaces that are identified when you plug them into the DB9 analog input of any DEWE-43 input channel. Under DS-7 software, the MSI will be discovered and set up automatically within the software.
These are "smart" interfaces that are identified when you plug them into the DB9 analog input of any DEWE-43 input channel. Under DS-7 software, the MSI will be discovered and set up automatically within the software.
MSI-BR-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-BR-V200
200 Volt input smart adapter
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
MSI-BR-TH (J, K, T, C)
Thermocouple smart adapter
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
MSI-BR-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-BR-CHA-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
ADAPTERS for other input types
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
ADAP-CONN-DSUB-9
Mating 9-pin DSUB connector with screw terminals inside, for easy hook-up without any soldering or de-soldering.
ADAP-MDAQ-BNCF
9-pin DSUB to BNC connector adapter, with impedance matching resistor inside.
ADAP-SHUNT-20MA
Shunt adapter, 50 Ω, 0.1%, 1 W. For 0-20 mA signals. BNC input connector
DEWE-2600 Resources
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
